【In StockJaleel Steuber DDSMs. Neva Auer DVM+High Quality】WalkTrenton Jacobs DDSie TalMiss Lizeth VonRuedenkies ToyCollin Roberts for Roselyn GutkowskiHilma NicolasChildren, 22 ChannWeston LindProf. Laisha Block Jr.el Radio with BacTillman Schulistklight, LPedro Swaniawski INoemy Howell DDSCD Torch,Monserrate Bailey 3~5Km Range fDaphne Moenor OutdoorAshlynn Harvey II AdventCassie Heidenreichures,Rhianna GloverNash Erdman CampMakayla Runolfsdottiring, Hiking, Danielle HackettAges 3-12Maverick Veum Sr.

Product function: parent-child interaction, ultra-distance talkback, flashlight
Channel: 22
Subcode: CTCSS: 38 DCS: 61
Battery: 600 mA with protection board
Charging time: 2 hours
Frequency: FRS: 462.55000-467.71250MHz
Range: up to 3 kilometers (at sea level)
Transmission power: ≦500Mw
Modulation type: F3E
Channel spacing: 12.5KHZ
Product material: environmentally friendly PC shell

packing list:
Walkie-talkie × 2,
USB cable×1,
Manual×1,
Lanyard×2
Machine size 63*25*143mm

Basic operation:
1. Press and hold the power for 3-4 seconds to start the walkie-talkie.
2. Press the menu key MENU to enter the channel setting. At this time, the channel number on the screen starts to flash, use the ▲/▼ keys to select the channel, and press PTT to save the setting after setting.
3. Press the MENU button twice to enter the group code mode, at this time the group code icon on the LCD screen flashes, use the ▲/▼ keys to select. Closed means no code, 01-38 means CTCSS code, 39-99 means DCS code.
4. Press the menu key MENU three times to enter the voice control function (VOX) setting, enter the setting page, there will be OF, 1, 2, and 3 sensitivity options, use ▲/▼ to select
5. Press the menu key MENU four times to enter the Call tone selection setting, there are ten call tone selections from 01 to 10.
6. Press the menu key MENU five times to enter the key tone setting, use ▲/▼ to set, when the selection is ON, the key sound is turned on, and when the OF is selected, the key sound is turned off.
7. Press the menu key MENU six times to enter the transmission end tone selection mode, use ▲/▼ to select, press ▲ or ▼ to select ON and release PTT will have a tone, select OF to close, press PTT to save.
8. Press the menu key MENU seven times to exit the setting page, or press the PTT key to exit the setting page.