Special OAlverta Mooreffer 600WDr. Adriel O'Kon MD SubwooferAnastacio Ward AmplifiSunny HillMozelle Hoegerer Board TValerie Pagacas5630 SuAurelio Schaefer Ibwoofer

TAS5630 subwoofer (600W)

product description:

All parts of this product are original authentic, plain and pure quality; Using high-quality original parts is not only a guarantee of safety and quality, but also a long service life, and more importantly, it is a strong guarantee to make practical performance reach the design goal. Pursuing first-class quality is our consistent aim.

Product Details:

OPA1632 is a fully differential amplifier used to drive high performance audio analog-to-digital conversion (ADCs). Highest audio quality, it provides very low noise and output drivers, this application is optimized and designed with OPA1632 excellent gain bandwidth of 180MHz 50V/μs and very fast conversion rate, resulting in very low distortion of 0.000022%. 1.3nV/& radic;Hz with very low input noise further ensures the maximum signal-to-noise ratio and dynamic range. The flexibility of fully differential structure can easily realize single-ended fully differential output conversion. Differential output reduces even harmonics and common-mode noise OPA1632 provides ADCs high-performance audio PCM1804 with excellent performance. The driver, such as shutdown during use, also enhances the flexibility of the amplifier. TI's TAS5630 is a Class D amplifier integrated with feedback analog input 300W stereo (total power 600W), which can provide up to 300W stereo sound from a single power supply 50V to a 4 ohm speaker, it has the performance of traditional class AB amplifier (<0.03% THD) and the power efficiency of Class D amplifier. Its SNR is greater than 100dB,PSRR is 80dB, power level efficiency is as high as 88%, TI industry's highest power class D amplifier-

N use original TAS5630,OPA1632DR ,TL072

N the main filter electrolytic capacitor adopts a capacity of 470UF/100V * 4 to ensure strong continuous power support.

N the resistance adopts five-ring metal resistance, and the main circuit adopts five-ring metal film resistance with accuracy of 1%, which ensures the good signal-to-noise ratio of the whole machine.

N fully shielded high-current inductance is adopted to ensure the sound is crisp and powerful.

N PCB adopts 1.6mm thick double-sided plate, 2.0 oz copper thick, full process of tin spraying to ensure good passing performance of large and small current. First-class PCB quality.

Basic parameters:

1. Working mode: Class D

2. Static current: 65mA

3. Work Efficiency: 88%

4. Output power: 600w/4 Euros 10% ZHD

5. Frequency response: 20Hz to 20kHz

6. Dynamic range:>100 dB

7. Signal-to-noise ratio: 100dB(A-Weighted)

8. Working voltage: DC48V

9. PCB size: 140 * 95MM

10. Potentiometer function: from left to right 1. Subwoofer Frequency 2. Volume

11. Potentiometer spacing: 34MM, line length 30CM

12. Weight: 440g